You are likely wondering what mold has to do with EMFs and 5G. Interestingly enough, there is a rather big connection between mold, EMFs, and 5G.
It is important to note that this article is NOT propaganda based. This article is well researched and based on scientific evidence and published studies. The goal is to break down the information into understandable pieces so you can learn what you can do to protect your home, yourself, your family, and your pets from the ill effects of this lethal combination.
Before we dive into the meat of this article, let’s get a few basics out of the way.
What Are EMFs?
EMFs are Electromagnetic Fields. They are also known as Electromagnetic Radiation (EMR).
There are four main types of EMFs. Let’s take a brief look at these in more detail.
- Radio Frequency Radiation (RF). RF is the higher frequency radiation created by cell phones, wi-fi, bluetooth, cordless phones, smart meters, radar and many other technologies.
- Magnetic Fields. Magnetic fields are caused by net current flowing. Wiring errors in homes can produce elevated magnetic fields. Current flowing in places it shouldn’t be, like pipes and cable lines, are also common sources of magnetic fields in homes. AC to DC transformers create magnetic fields. Metal in bed frames and furniture can be magnetized and cause a disturbance of the earth’s natural magnetic field.
- Electric Fields. Electric fields are caused by building wiring being energized. Electric fields induce voltage on the body.
- Dirty Electricity. Dirty electricity is higher frequency transients and harmonics that are found on building wiring. Power supplies that convert electricity from alternating current (AC) to direct current (DC) typically create dirty electricity.
Most electronics emit some level of EMFs. Some of the most common sources of EMFs in your home include:
- Cell phones
- Cordless phones
- Refrigerators / Freezers
- Smart TVs
- Fitness trackers
- WiFi Routers
- Bluetooth and other non-wired headphones
- Electric blankets
- Hair dryers
- Electrical panels (where electricity enters the home)
Some of the most common sources of EMFs outside of your home include:
- Power Lines
- Ultraviolet waves
- Cell phone towers
What Is 5G?
5G is the latest cellular technology. 5G will employ millimeter waves for the first time in addition to microwaves that have been in use for older cellular technologies, 2G through 4G. 5G also employs new technologies (e.g., active antennas capable of beam-forming; phased arrays; massive multiple inputs and outputs, known as massive MIMO) which pose unique challenges for measuring exposures.
Why Is Everyone So Concerned About EMFs and 5G?
In 2012, a 650-page report by the BioInitiative group titled, A Rationale for Biologically-based Exposure Standards for Low-Intensity Electromagnetic Radiation compiled over 2,000 scientific studies that outline the effects of EMFs from all sources on human health. They found that low-level radiation (as emitted by your cell phone) can contribute to a wide variety of health issues and disease states ranging from minor to life threatening.
The World Health Organization has declared EMF Radiation as a Class 2B, possible human carcinogen. The American Academy of Environmental Medicine, American Academy of Pediatrics and American Society of Reproductive Medicine have all issued warnings due to the health hazards associated with EMF Radiation.
I won’t outline a complete list of all the negative health risks associated with EMFs but they have been well documented and the list is long.
What about 5G?
The 5G network will utilize many higher frequencies that have never before been used or tested for human safety. Current FCC safety guidelines are from 1996. Mind you, the FCC adopted those limits based largely on research from the 1980s.
Given limited reach, 5G will require cell antennas every 100 to 200 meters, exposing many people to millimeter wave radiation. The 5G millimeter waves are mostly absorbed within a few millimeters of human skin and in the surface layers of the cornea. Since 5G is a new technology, there is no research on the actual health effects as of yet. However, the consensus is that short-term exposure can have adverse physiological effects in the peripheral nervous system, the immune system and the cardiovascular system. Long-term exposure may pose health risks to the skin, the eyes, and the reproductive organs.
The Connection Between Mold, EMFs and 5G
The moment you have been waiting for… Let me do my best to keep this as simple as possible.
A well-known medical practitioner, Dr. Klinghardt, uncovered a connection between EMFs and mold. During his research, he found that EMFs could be responsible for driving certain molds to produce high levels of mycotoxins. In other words, electromagnetic fields could be making molds more aggressive and reactive.
You might want to watch the video below. It is very interesting. Dr. Klinghardt explains the results of a laboratory test done by a physician in Switzerland connecting an extreme rise in mold growth to it’s exposure to EMF frequencies. Here is one of the quotes from the video:
An acquainted physician in Switzerland who is a main mold researcher in Europe made a beautiful experiment. He grew mold cultures under a farraday cage. Simply a silver cloth… it looks like a mosquito net made out of silver coated cloth draped over the mold culture.
Then he measured how much mycotoxins how much toxins are these molds producing on a daily basis, very easy to do.
Then he lifted the mosquito net and exposed the mold culture to the ambient electromagnetic radiation in his laboratory that was caused by the lights that were on, the computer in the corner and especially he found out later the ambient cell phone radiation. You know, from the nearby cellphone tower that was broadcasting cell phone radiation.
He found out that the production of biotoxins in this culture went up more than 600 times. Not only that the mold suddenly put out significantly more mycotoxins to protect themselves but also much more virulent, much more viscous, more poisonous mycotoxins.
In laypersons terms… Dr. Klinghardt showed that 1 inch of black mold on the wall produces 20-40 mycotoxins in 24 hours, but when exposed to EMF like Wi-Fi, it produces 2000. Microbes exposed to EMF feel threatened and their self-defense is to produce toxins. In that scenario, mold is threatened, and it produces loads of mycotoxins.
Dr. Klinghardt is not alone in unveiling the dangers behind EMF mold exposure.
Researchers at the Albert Einstein College of Medicine released their findings of fungi growth induced by high levels of EMFs. The Einstein researchers performed a variety of in vivo tests using three genetically diverse fungi and four measures of cell growth. The studies consistently showed that ionizing radiation significantly enhances the growth of fungi that contain melanin.
For example, two types of fungi–one that was induced to make melanin (Crytococcus neoformans) and another that naturally contains it (Wangiella dermatitidis)—were exposed to levels of non-ionizing radiation approximately 500 times higher than background levels. Both species grew significantly faster (as measured by the number of colony forming units and dry weight) than when exposed to standard background radiation.
Dr. Thomas Rau, medical director of the Paracelsus Clinic in Switzerland, shares his assessment of the microbial connection with EMFs in an interview featured on the website Electromagnetic Health. Not only do the artificially produced electromagnetic waves cause toxic mold to grow faster, they suppress the production of beneficial microbes. “Toxic mould in homes grows much faster under the load of high electromagnetic loads. They grow much faster in a disturbed milieu. Mercury / heavy metals can also exacerbate the growth.”
A Russian research project explored the still-highly-radioactive damaged reactor at Chernobyl. They sent a robot to only return with samples of black, melanin-rich fungi growing.
Now – there are currently NO studies showing the effects of 5G on mold. However, let’s give consideration to this for a minute. 5G millimeter waves easily enter human skin and attack our cellular structure. Doesn’t it stand the reason that 5G millimeter waves will have an even easier time penetrating a mold spore? They will get in faster than EMFs did in Klinghardt’s experiment. From where I sit, this can only mean one thing. Mold will produce even more dangerous types of mycotoxins at an ever higher rate thanks to 5G.
But let’s go a step further. If you have been exposed to mold and your body is carrying a fungal load INSIDE of it, what do you think that mold is doing while it moves about your body? It produces mycotoxins. And if EMFs and 5G cause mold to produce crazy numbers of mycotoxins in buildings , what might be going on inside your body? You guessed it.
With 5G rolling out everywhere, exposing us to levels of EMFs we have never seen before, it is imperative to do everything you can to prevent mold, properly remove mold you do find, and prevent leaks.
Here are a few articles to bookmark or Pin to help you with this:
- Mold Prevention – a resource page with loads of links
- 27 Tip To Prevent Mold and Mildew In Your Home
- Leak Detection – a resource page with loads of links
- Common Places Water Leaks In Your Home and How To Prevent Water Damage
- Mold Removal and How To Kill Mold – a resource page with loads of links
You Need To Protect Your Home From EMFs and 5G
There is a lot of information out there about how to protect yourself from EMFs but no one talks about protecting your home. After reading all of the information about EMFs and Mold, don’t you want to make sure your home’s EMF load is significantly reduced in the event a little mold finds its way inside? How can you do that?
First, limit the number of electronics you have plugged in. Yes, plugged in. Turning something off doesn’t magically stop it from producing EMFs. If it is plugged in, it is producing EMFs. So completely unplug anything you are not using regularly and at the end of the time before bed, unplug anything you won’t be using overnight.
Remove your Smart Meter if you have one. Yes, it will be a battle but it’s worth the fight!
Get rid of your microwave.
Skip the Smart devices and go old school. The smarter your appliances, thermostat, and front door lock are, the more EMFs they emit from the WiFi they are connected to. I promise, you don’t actually need to talk to your oven.
Using this checklist, self-assess your home’s EMF situation and take steps to address it.
Purchase and install these VERY specific EMF products from EMF Solutions. These EMF products have been very carefully designed by a team who understands how mold reacts to EMFs. You can learn more about their science here, but check out this really awesome visual showing just how well they work.
Two pieces of bread from the same loaf placed same distance from Wi-Fi. Bread on right has the Device Chip under it for EMF remediation and resulted in ZERO observable mold. 3 weeks later Bread on right had NO observable mold still!
Crazy right? There is NO other EMF product on the market that has been specifically tested with mold. Better yet, not only do the EMF products from EMF Solutions address the Mold and EMFs issue but they also address the 5G and Mold issue.
You Need To Protect Yourself From EMFs and 5G
There are many things you can do to protect yourself from EMFs and 5G. Using the products from EMF Solutions in your home will certainly offer you great protection. They even have a few products just for personal use while sleeping, using your cell phone, and operating your vehicle. I highly suggest you check those out.
An important note about EMF Solution’s cell phone protection! It is the only product on the market that I have researched and tested that DOES NOT inadvertently increase the amount of EMFs emitted from the cell phone. Some of the other products actually interfere with phone signals, making the phone work harder and actually emit more radiofrequency energy.
Beyond that, you can help repair your cells from the damage caused from 5G and EMFs (as well as mold exposure) with a product called Phytozon. I have written about this on my other website. Here are links to those articles:
- Phytozon – The # 1 Way To Reduce The Negative Health Effects of EMF Exposure
- How To Repair Cellular Damage From Mold Exposure
You also want to make sure you are doing the following as often as possible:
- Turn off WiFi at night
- Do not keep your cell phone next to your bed. If your cell phone is in your bedroom, put it in airplane mode.
- Avoid body contact with your cell phone (i.e. don’t put in a pocket) and laptop (don’t put it directly on your lap).
- Get wired! Use an ethernet cable instead of WiFi for all laptops and computers. I know it sounds ridiculous but I have a 200 foot cable that runs all over the place in order to avoid using WiFi with my laptop.
So what are your thoughts on Mold and EMFs? Did this article get you thinking? Please feel free to reach out to me with any questions.
Sources for this article include: