DOES BORAX
MOLD?
KILL
WHEN?
WHY?
Applying borax to mold creates an environment that is not suitable to additional mold growth. In many cases borax kills mold spores by turning up the pH levels and making their environmental inhospitable. When it comes to cleaning mold and mold removal, there are a lot of options available. Some work well, some don’t work at all, and some fall in-between the two extremes. Borax falls on the “works well” end of the spectrum.
WHAT IS
BORAX?
Borax (sodium tetraborate) is a natural white mineral and salt powder compound derived from boron, a non-metal element which is mined from the ground. It is most often found in dried-up lake beds. It has a pH level of 9.3 and is very alkaline.
REMOVE
MOLD ON CLOTHES WITH BORAX
1. Mix half a cup of borax powder with hot water. This is to make sure it completely dissolves. 2. Add the borax and water solution to your washing machine after it has filled with water. 3. Washing your clothes as you normally would. You can do a presoak if you would like but it is not necessary.
HOW TO:
REMOVE
MOLD WITH BORAX
METHOD 1 – BORAX MOLD SPRAY
HOW TO:
1. Place borax in the gallon container. 2. Fill the container with hot water, put the lid on, and shake it well. 3. Pour the solution into the spray bottle. 4. Spray the affected area. Be careful not to use too much on a porous material, like unfinished wood or drywall. 5. Scrub the area with a scrub brush, rag or sponge until mold is removed. 6. Wipe the area clean and dry the area. 7. You do not have to rinse afterwards. The borax will usually prevent the mold returning.
METHOD 2 – BORAX MOLD PASTE
1. Mix borax and boiling water. 2. Stir well until most of the Borax is dissolved. 3. Using a paintbrush or a rag, cover every bit of mold with the borax paint. 4. Allow it to dry. 5. You can paint over the wood with mold resistant paint or primer if you would like.
REMOVE
MOLD WITH BORAX
HOW TO:
Reviews
"Worked well and was easy to make and apply these methods!"