Endurance BioBarrier Cleaner Prep and Endurance BioBarrier Review

Important Update! Endurance BioBarrier is now Superstratum! Same great product, new name! An updated article will arrive January 2022.

In my quest to discover mold removal products that work, I stumbled on Endurance BioBarrier. Intrigued, I spent quite a bit of time on their website, on the phone with customer service, and snooping around the internet for additional insight.

Honestly, the Endurance BioBarrier seemed a little too good to be true. It really did. I mean, how is it possible that there is a product that can prevent mold for 25 years???

But before we get to that, we have to chat about the Endurance BioBarrier Cleaner Prep because that is the actual product that removes the mold. Endurance BioBarrier stops it from growing in the first place.

Endurance BioBarrier Cleaner Prep

Endurance BioBarrier Cleaner Prep effectively removes mold from all interior and exterior surfaces. It is a powerful mold removal cleaner that is water-based, environmentally friendly, and contains zero VOCs. It is designed to remove mold, mildew, and surface contaminants with ease and minimal effort. It is low foaming and rinses clean with no residue.

Active Ingredients

The tricky part about this product is that their entire formula is propriety. So finding out what is in it is next to impossible. It does smell a little bit like a sugar cookie but their website mentions a light vanilla scent.

Pros of Endurance BioBarrier Cleaner Prep

• So very easy to use! Spray it, let it set for 15 minutes, then depending on the mold situation either wipe it up or scrub to lift the mold away.
• No odor at all
• Not greasy or filmy
• Worked better at loosening mold than some other products I have tried
• Ready to use – no dilution required

Cons of Endurance BioBarrier Cleaner Prep

• Doesn’t remove mycotoxins

Toxic or Non-Toxic

Absolutely non-toxic! Their Material Safety Data Sheet shows that they scored an “A” and there are absolutely no hazardous ingredients.

Now Let’s Take A Look At The Endurance BioBarrier Mold Prevention Spray

Endurance BioBarrier Mold Prevention Spray is a formula that applies a water-based coating wherever it is sprayed. It has been laboratory and military tested and proven to inhibit the growth of molds, mildew, and biological odors on the film of the treated surfaces. Is is darn near the perfect indoor mold and outdoor mold prevention solution for home, auto, school, marine, manufacturing and industrial environments. Effective on both wet and dry surfaces. This liquid may be applied to virtually any surface or substrate.

One application of Endurance BioBarrier Mold Prevention Spray invisibly protects through hundreds of wet-dry cycles on any indoor or outdoor surface. No product on the market has the long term ability to prevent the growth of mold that Endurance BioBarrier does.

There are several ways to control microbial growth. Antimicrobials can disrupt the food cycle and “starve” the cell. Some antimicrobials disrupt the DNA and prevent the cell from reproducing. Other antimicrobials puncture and rupture the cell walls. By using a combination of antimicrobials and not relying on a single chemistry, Endurance BioBarrier uses all ingredients that cover all three methods of mold prevention.

Endurance BioBarrier, when properly applied, will prevent mold from growing back for six months up to 25 years depending on application location. They guarantee six months in bathrooms, kitchens and flooring. A two year guarantee is provided for all walls, interior and exterior, including ceilings and roofs. And, a 25 year guarantee on crawl spaces, stud cavities, or other spaces where it is unlikely that the surface will be disturbed.

Active Ingredients

Again, the active ingredients include a proprietary blend of antimicrobial/biocides that are EPA/TSCA registered to destroy pathogens and are formulated to eliminate mold, mildew and germs within 48 hours.

How Endurance BioBarrier Works

It all comes down to the BioDoor Dual Layer Technology formula.

When applied, a high tech polymer layer microscopically binds a proprietary blend of biocides and fungicides to the surface, preventing those active ingredients from being easily rinsed away.

The polymer “biobarrier” is designed to adjust to wet versus dry conditions, opening up in wetter conditions to allow just the right amount of active ingredients to be exposed to and fight mold, mildew and germs.

By protecting and rationing the active ingredient layer, the top polymer layer extends the mold prevention effectiveness of Endurance BioBarrier well beyond all competitors.

Below is a partial list of prominent mold species and microbes, including black mold, killed in laboratory tests by the active ingredients in Endurance BioBarrier.

• Acremonium implicatum
• Altermaria alternate
• Aspergillis falvus
• Aspergillis niger ATCC #1015
• Aspergillis niger ATCC #6275
• Aspergillis niger ATCC #9642
• Aspergillis versicolor
• Auerobasidum pullulans ATCC #7305
• Auerobasidum pullulans ATCC #9642
• Bacillis subtilis
• Cladosporium cladosporoides
• Curvularia lunata
• Desufovbrio desulfuricans
• Enterobacter aerogenes
• Escherichia aerogenes
• Escherichia coli
• Paeciliomyces lilancinus
• Paeciliomyces varioitti
• Penicillium citrinium
• Penicillium fellutanum
• Penicillium notantum
• Penicillium Funiculosum
• Penicillium sp.
• Proteus vulgaris
• Pseudomonas aeruginosa
• Pseudomonas fluorescens
• Stachybotrys charatum
• Staphlyococcus aureus
• Strepococcus faecalis
• Trichoderma virens
• Trichoderma viride
• Ulocaladium charatum

This is seriously an impressive list!

Pros of Endurance BioBarrier

• Depending on the surface location, you can prevent mold for anywhere from 6 months to 25 years
• They guarantee their product for life
• Completely non-toxic
• Easy to apply even in large areas
• Can be applied to damp areas
• Can be used indoors and outdoors
• Removes and prevents the regrowth of 99.9% of microbes which cause odors
• Safe for all surfaces
• No special handling, equipment or safety gear required when applying
• Easily confirm successful application by shining black light on surfaces as treated surfaces glow
• Ready to use – no dilution required

Cons of Endurance BioBarrier

• If you harshly scrub the surface or use a caustic cleaning product, then you will need to re-apply Endurance BioBarrier Mold Prevention
• Need to stay out of the room or area after it has been sprayed for at least an hour to allow the product to settle
• Ideally you will use a sprayer to apply this which for some might be an issue

Toxic or Non-Toxic

Absolutely non-toxic!

Final Verdict On Endurance BioBarrier Cleaner Prep and Endurance BioBarrier Mold Removal Spray

Go get these products now! While I love me some EC3 Mold Solution and would likely use it in place of the Endurance BioBarrier Cleaner Prep, I do think that these products work well together since they were designed to do so.

I really like how the Cleaner Prep works and the science behind the Mold Removal Spray is solid. I am currently experimenting with the Endurance BioBarrier in my shower where even I battle a little mold now and again. I will update you on how that all turns out. I am only a couple of weeks into the experiment.

I have read hundreds of reviews of both products and there is no doubt that Endurance BioBarrier prevents mold from growing. Customer after customer have raved about how it has solved their mold problem.

Why wouldn’t you want to use a product like Endurance BioBarrier that really, truly prevents mold from growing anywhere you apply it? And it’s non-toxic to boot! Endurance BioBarrier should absolutely be a part of your mold prevention strategy!

Click Here To Purchase Endurance BioBarrier – now Superstratum Mold and Mildrew Protectant

Click Here To Purchase the Cleaner Prep – now Superstratum Mold and Mildew Stain Remover

To learn more about the other mold removers and commercial mold cleaning sprays I have reviewed, please visit my post on the Best Mold Remover Products.